 ORDER |
|
General Information on Faceting: |
Diamond Saw Blades and Coolants:
We stock many blades for faceting saws, trim saws and slab saws up to 24". We can also supply you with blades up to 36 inches in diameter. For prices on 8" and larger blades, please check out the diamond saw blade page on our cabbingmachines.com website.
Pro-Slicer Blades:
Pro-Slicer
blades are thin core fast cutting blades. The 4" and 6" sizes can be
used with water coolant on most stones. For slabbing, trimming agates and jaspers
or other heavy cutting jobs, you should use an oil-based coolant. Oil provides
better cooling properties, which will give you longer blade life. Super thin blades
should be run at 3450 RPM.
We stock all Pro-Slicer
blades!
| Pro-Slicer Blades | |||
| Description | Arbor Hole | List Price | Our Price |
| 4" Diameter .004" Thick (.007" kerf) |
1/2" |
$26.00 |
$22.50 |
| 4" Diameter .004" Thick (.007" kerf) | 5/8" | $26.00 |
$22.50 |
| 4" Diameter .012" Thick (.016" kerf) | 1/2" | $26.00 |
$22.50 |
| 4" Diameter .012" Thick (.016" kerf) | 5/8" | $26.00 |
$22.50 |
| 6" Diameter .006" Thick (.009" kerf) | 1/2" |
$34.60 |
$26.00 |
| 6" Diameter .006" Thick (.009" kerf) | 5/8" |
$34.60 |
$26.00 |
| 6" Diameter .012"
Thick (.016" kerf) | 1/2" |
$34.60 |
$26.00 |
| 6" Diameter .012" Thick (.016" kerf) | 5/8" | $34.60 |
$26.00 |
| 6" Diameter .025" Thick (.032" kerf) | 1/2" |
$38.90 |
$29.75 |
| 6" Diameter .025" Thick (.032" kerf) | 5/8" | $38.90 |
$29.75 |
8" and 10" Pro-Slicer blades are on our cabbingmachines.com website.
Pro-Slicer Gorilla Blades:
Pro-Slicer Gorilla blades have coarser diamond than standard Pro-Slicer blades. They are extremely fast cutting blades and last longer than standard Pro-Slicers. Six inch Gorilla blades can be used with water coolant on most stones, but we suggest using an oil-based coolant such as Lapidary Oil to extend the life of your blades. For slabbing or other heavy cutting jobs and for longer blade life, an oil coolant is a must. Super thin blades should be run at 3450 RPM.
We stock all Gorilla Pro-Slicer blades!
| Gorilla Pro-Slicer Blades | |||
| Description | Arbor Hole | List Price | Our Price |
| 6" Diameter .012" Thick (.019" kerf) |
1/2" |
$45.15 |
$35.00 |
| 6" Diameter .012" Thick (.019" kerf) | 5/8" |
$45.15 |
$35.00 |
8" and 10" Gorilla Pro-Slicer blades are on our cabbingmachines.com website.
Smart Cut Sintered Blades
These
new blades have diamond throughout the edge and cut aggressively. What makes
them stand apart from other sintered blades is the diamond is oriented in the
blade for the most aggressive cutting action. Smart Cut blades also last
a long time, because the diamond isn't just plated on top of the rim. Instead,
diamond particles are incorporated into the actual metal of the rim. Smart
Cut blades up to 10" in diameter work great with water, but we advise using
an additive such as Lube Cool 4800. If you use oil, these long-lasting blades
will last even longer! Note: 8" and smaller Smart Cut blades will not
rust.
We stock all Smart Cut blades up to 14" in size!
For Smart Cut blades larger than 6", please check out the diamond saw blade page on our cabbingmachines.com website.
| Smart Cut Sintered Blades | |||
| Description | Arbor Hole |
List Price | Our Price |
| 4" Diameter .014" Thick | 1/2" | $6.00 |
$42.00 |
| 4" Diameter .014" Thick | 5/8" | $56.00 |
$42.00 |
| 4" Diameter .020" Thick | 1/2" & 5/8" | $60.00 |
$42.75 |
| 6" Diameter .014" Thick | 1/2" | $64.00 |
$44.25 |
| 6" Diameter .014" Thick | 5/8" | $64.00 |
$44.25 |
| 6" Diameter .020" Thick | 1/2"
& 5/8"
| $68.00 |
$46.50 |
| 6" Diameter .032" Thick | 1/2"
& 5/8"
| $70.00 |
$48.00 |
Economy Blades:
We carry a line of econony blades that is similar to Raytech Blazer Blades. Four types of blades are available:
Silver blades have a notched construction on a thin core for cutting more precious material. Similar to Blue Blazer.
Black blades are sintered and have more diamond for the tougher work needed in cutting dense material like agate. Similar to Black Blazer.
Red blades are sintered continuous rim blades with a heavy concentration of fine diamond on a thin core. Similar to Yellow Blazer, but better price.
Green blades are notched rim blades for general lapidary such as slabbing. Similar to Green Blazer.
We suggest using an oil-based coolant such as Lapidary Oil to extend the life of your blades. Heavy cutting jobs require the use of an oil-based coolant.
For Economy blades larger than 6", please check out the diamond saw blade page on our cabbingmachines.com website.
We stock all Economy blades up to 24" in size!
|
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Raytech Blazer Blades:
We are discontinuing all Raytech Blades. Get them at our low, low closeout prices while they last!
Raytech blades fit 5/8" and 1/2" arbors, because
they come with a 5/8" to 1/2" bushing. Yellow Blazer
blades have a heavier concentration of fine diamond on a thin core. We suggest
using an oil-based coolant such as Lapidary Oil to extend the life of your blades.
Heavy cutting jobs require the use an oil-based coolant.
| |||||||||||||||||||||||||||||||||||||||
Lube Cool 4800:
Back in Stock!
Add Lube Cool 4800 to your water coolant to extend the life of your saw blades. It keeps your blade running cool and sharp. It also contains rust inhibitors. Doesn't contain any harmful chemicals and is 100% biodegradable. Mix 1 part Lube Cool to 10 parts water for most cutting. Use a stronger mix for harder stones.
|
Lube Cool 4800 | |
| Description | Price |
| 16 ounces (Makes over 1-1/4 gallons of
cutting solution) |
$8.25 |
Cutting Oil:
Many old-timers still use Almag or Pella oil, which is stinky and causes rashes on sensitive skin. We use a special grade of white oil that has a high flash point, has absolutely no detectable odor and is kind to your skin.. It does at least as good a job of cooling and lubricating as Almag and Pella oils. An added benefit is your slabs don't have the nasty smell of the old-style oils.
Oil coolants are for heavy duty cutting and provide the greatest protection for your blades. The other advantage of using oil as a coolant is it can be left in your saw without the worry of rusting your blade. If you cut agates, this is the coolant for you.
We carry two brands of oil: Lapidary Oil and Covington Rock Hound Oil. They are the same thing with different labels. The one gallon containers of Lapidary Oil are easier to handle than the 5 gallon bucket of Rockhound Oil, but are more costly per gallon.
|
| |||||||||||
Blade Dressing Sticks:
When your diamond blade acts sluggish and cuts slowly, don't throw it out. Instead, cut into a blade dressing stick a few times. The special aluminum oxide of these dressing sticks unclogs the cutting edge of your blade and exposes new diamond. In a few seconds, your old blade will be cutting like new.
|
Blade Dressing Stick | |
| Description | Price |
| 1/2" x 1/2" x 6" |
$3.75 |
|
General Information on Faceting: |
|
ORDER |
| Copyright by ColorWright - All Rights Reserved. Our Privacy Policy. | Toll Free Order Line FOR ORDERS ONLY (877) 548-1439 or Email Us |